The Impact of Hydrophilic Coatings on Medical Device Performance: A Comprehensive Review
Main Article Content
Abstract
Hydrophilic coatings—specialized surface treatments composed of water attracting polymers that form lubricious, hydrated layers when exposed to bodily fluids—have revolutionized the field of medical device surface modifications by significantly enhancing device performance through friction reduction, improved biocompatibility, and minimized adverse biological responses. These coatings consist primarily of hydrophilic polymers that, upon hydration, create smooth interfaces that facilitate easier navigation through tissues, minimize trauma during minimally invasive procedures, and reduce complications such as thrombosis and infections. This comprehensive review examines the chemical composition of hydrophilic coatings, their physicochemical mechanisms, and clinical applications. We discuss performance benefits, manufacturing challenges, and regulatory considerations, followed by insights into emerging innovations like stimuli responsive coatings, antimicrobial integration, and biomimetic nanostructures. By highlighting current knowledge gaps and future directions, this article aims to provide an authoritative resource on hydrophilic coatings in modern medical device design and patient care.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
I. Zhang, Y., Liu, J., & Wang, S. (2023). Polyacrylamide-based hydrogel coatings improve biocompatibility of implanted pump devices. Biomaterials Science.
https://pmc.ncbi.nlm.nih.gov/articles/PMC10161736/
II. Martínez, A., Gomez, F., & Lee, H. (2024). Advances in antimicrobial coatings for preventing infections of head-related implantable medical devices. Coatings. https://www.mdpi.com/2079-6412/14/3/256
III. Singh, R., Ivanov, I., & Tzanov, T. (2023). Multifunctional coatings on implant materials—a systematic review of the current scenario. Coatings. https://www.mdpi.com/2079-6412/13/1/69
IV. Lin, W., Kluzek, M., Kampf, N., Cao, Y., & Klein, J. (2024). Bioinspired polymer-incorporating self-lubricating and antifouling hydrogels. arXiv. https://arxiv.org/abs/2404.05234
V. Tang, K., Wang, J., Pei, X., Zhu, Z., Liu, J., Wan, Q., & Zhang, X. (2025). Flexible coatings based on hydrogel to enhance the biointerface of biomedical implants. Advances in Colloid and Interface Science, 335, 103358.
https://doi.org/10.1016/j.cis.2024.103358
VI. Lin, W., Kluzek, M., Kampf, N., Cao, Y., & Klein, J. (2024). In vitro biocompatibility analysis of protein-resistant amphiphilic polysulfobetaines as coatings for surgical implants in contact with complex body fluids. Frontiers in Bioengineering and Biotechnology.
https://www.frontiersin.org/articles/10.3389/fbioe.2024.1403654/full
VII. Dahl, R. H., Larsen, R. W., Thormann, E., & Benndorf, G. (2022). Polytetrafluoroethylene coating fragments during neuroendovascular therapy: An analysis of two damaged microguidewires. Interventional Neuroradiology, 28, 16–21.
https://pmc.ncbi.nlm.nih.gov/articles/PMC8905087/
VIII. Slezak, R., Bloch Bogusławska, E., & Grzanka, D. (2023). Fragments of hydrophilic polymer coating as an embolic material—rare complication and potential cause of death. Archives of Medical Science and Criminology, 73, 168–175. https://ejournals.eu/czasopismo/amsik/artykul/fragments-of-hydrophilic-polymer-coating-as-an-embolic-material-rare-complication-and-potential-cause-of-death-fragmenty-hydrofilowych-powlok-polimerowych-jako-material-zatorowy-rzadkie-powiklanie-i-potencjalna-przyczyna-zgonu
IX. Negut, I., Albu, C., & Bita, B. (2024). Advances in antimicrobial coatings for preventing infections of head-related implantable medical devices. Coatings, 14(3), 256.
https://doi.org/10.3390/coatings14030256
X. Mehta, R. I., & Mehta, R. I. (2021). Hydrophilic polymer embolism: Implications for manufacturing, regulation, and postmarket surveillance of coated intravascular medical devices. Journal of Patient Safety, 17(8), e1069–e1079.
https://doi.org/10.1097/PTS.0000000000000473
XI. Li, Q., Kong, H., & Zhang, N. (2024). Multifunctional coatings on Mg-based metallic biomaterials and implants. Advanced Engineering Materials, 26(10), 2301867.